Subheader Icon 877-412-3651
Article Watch LIVE at 11:40 AM EDT as the ExoMars Spacecrafts Arrive at Mars Image

After a seven month journey, the ExoMars spacecrafts launched by the European Space Agency and the Russian Federal Space Agency, or Roscosmos, will finally approach Mars today.

The goal of the ExoMars spacecrafts is to determine whether or not there has ever been alien life on the Red Planet.

On Sunday, the two spacecrafts went their separate ways as Trace Gas Orbiter (TGO) and Schiaparelli lander began the final phases of their missions.

Around 9AM ET, the TGO will slow down in order to enter Mars’s orbit while the Schiaparelli lander will be on its way to land on the surface of our planetary neighbor intact.

Schiaparelli will begin its descent from 75 miles above Mars’ surface at 10:42AM ET, where the vehicle will then rely on its parachute and thrusters to land it smoothly onto the surface.

You can watch the entire live stream from ESA below, beginning at approximately 11:40 AM EDT.

Related Articles

Latest NIST Laser Method Could Unlock New 3D-Printed Metal Alloys Image
Industry News

NIST Laser Method Could Unlock New 3D-Printed Metal Alloys

Argonne National Laboratory’s Advanced Photon Source allowed researchers to observe the formation of new metal alloys during 3D printing, offering a closer look at the processes that shape next-generation materials. Credit: Argonne National Laboratory NIST researchers have developed a new laser-based method that could make 3D-printed metal alloys easier to produce, opening a possible route to s

Latest NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time Image
Aerospace

NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time

NASA’s X-59 quiet supersonic research aircraft has flown faster than the speed of sound for the first time, marking a major milestone for the agency’s Quesst mission. The aircraft reached supersonic speed on Friday, June 5, 2026, during an 81-minute test flight that began and ended at Edwards Air Force Base in California. NASA test pilot Jim “Clue” Less flew the X-59 to Mach 1.1, or about 713 m

Latest Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained Image
Metals

Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained

The best aluminum alloys for CNC machining balance machinability, strength, corrosion resistance, fatigue life, finish quality, and cost. For most buyers, the shortlist comes down to 6061, 7075, and 2024 aluminum. What are the best aluminum alloys for CNC machining? The best aluminum alloys for CNC machining are usually 6061, 7075, and 2024. Choose 6061 for general-purpose machined component

Latest U.S. Funds Global Tungsten Network as China Supply Risk Grows Image
Industry News

U.S. Funds Global Tungsten Network as China Supply Risk Grows

The U.S. is using government finance, defense funding, and stockpiling to rebuild tungsten supply chains and reduce reliance on China, according to Fastmarkets. Tungsten is used in armor-piercing munitions, aerospace alloys, and advanced manufacturing, but U.S. domestic mining has faded over several decades. Washington’s strategy combines support from the Export-Import Bank of the United States