Subheader Icon 877-412-3651
Article US and Australia Develop Hypersonic Missile That Flies a Mile Per Second Image

The dream of a hypersonic flight five times faster than the speed of sound came a step closer to reality with a successful experimental flight designated as ‘HIFiRE 4’ at the Woomera test range in South Australia.

Hypersonic is considered to be above Mach 5 (five times the speed of sound) while supersonic is merely above Mach 1 (the speed of sound).

With this successful test flight, a round of experiments were concluded under the US-Australia Hypersonic International Flight Research Experimentation (HIFiRE) program.

Aerospace engineering researchers from the University of Queensland (UQ) collaborated with the Defence Science and Technology Group (DST Group) and the US Air Force Research Laboratory (AFRL), Boeing, and BAE Systems for the test flights designated as ‘HIFiRE.’

This joint venture allows UQ to build advanced scramjet prototypes and carry out test flights at speeds of more than Mach 8 (8000 km/hr).

Although the details of this test flight have not been revealed, the previous test flight reached a velocity of Mach 7.5 (5,710 mph, 9,188 km/h) and an altitude of 278 km (173 mi).

The data collected during the test flight will help researchers to understand about how to maneuver a hypersonic aircraft at high altitude. The learnings could be employed across a range of applications.

A hypersonic missile could fly over 1000 miles in less than 17 minutes, or a mile per second

The United States and Australian defense forces are particularly interested in the results of HiFIRE because they will be in a better position to respond to the future threats with these game changer hypersonic missiles which will give them an ability to strike an enemy with almost no warning.

Below, the YouTube video shows the successful HIFIRE 4 test flight launch:

Related Articles

Latest Why Titanium Is Used in Aerospace Applications Image
Aerospace

Why Titanium Is Used in Aerospace Applications

Ever wondered why titanium is used in aerospace? It’s because it gives engineers a rare mix of strength, low weight, heat performance, and corrosion resistance. In aircraft design, every pound counts. But weight savings can’t come at the expense of safety, fatigue life, or certification. Which is why titanium is specified for parts where weight, strength, heat, and corrosion performance all aff

Latest NIST Laser Method Could Unlock New 3D-Printed Metal Alloys Image
Industry News

NIST Laser Method Could Unlock New 3D-Printed Metal Alloys

Argonne National Laboratory’s Advanced Photon Source allowed researchers to observe the formation of new metal alloys during 3D printing, offering a closer look at the processes that shape next-generation materials. Credit: Argonne National Laboratory NIST researchers have developed a new laser-based method that could make 3D-printed metal alloys easier to produce, opening a possible route to s

Latest NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time Image
Aerospace

NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time

NASA’s X-59 quiet supersonic research aircraft has flown faster than the speed of sound for the first time, marking a major milestone for the agency’s Quesst mission. The aircraft reached supersonic speed on Friday, June 5, 2026, during an 81-minute test flight that began and ended at Edwards Air Force Base in California. NASA test pilot Jim “Clue” Less flew the X-59 to Mach 1.1, or about 713 m

Latest Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained Image
Metals

Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained

The best aluminum alloys for CNC machining balance machinability, strength, corrosion resistance, fatigue life, finish quality, and cost. For most buyers, the shortlist comes down to 6061, 7075, and 2024 aluminum. What are the best aluminum alloys for CNC machining? The best aluminum alloys for CNC machining are usually 6061, 7075, and 2024. Choose 6061 for general-purpose machined component