Subheader Icon 877-412-3651
Request a quote
Article Solar Platform Station Will Hover in the Stratosphere to Provide Internet Connection Image

Companies like Starlink are advancing us into the “internet everywhere” direction. However, these satellite internet solutions are still costly and don’t provide the same speeds as regular on-the-ground providers. But what if you could put aircraft in the stratosphere and beam internet from there? That’s the idea behind the Sceye HAPS (High-Altitude Platform Station), which uses solar panels to hover in the stratosphere for prolonged periods.

Compared to satellites, Sceye’s solution is way easier and less expensive to launch, and more energy efficient. It’s an airship, too, filled with hydrogen, so hovering should take less energy. According to its maker, it should hover between 60,000 to 65,000 ft (18,288 to 19,812 m), or almost twice as high as commercial airlines. The airship uses gallium selenide and gallium arsenide solar cells, which would be more efficient at that altitude since clouds are almost non-existent in the stratosphere.

Sceye already tested the airship in 2021, with the maiden flight taking place at 64,600 ft (19,690 m). Last month, Sceye tested the charging system of the built-in batteries, with the airship staying at 61,000 ft (18,593 m) between 7:36 AM on August 16 to 12:21 PM on August 17. Meanwhile, during the first flight in 2021, the company tested the built-in 4G active antenna array with beam-forming technology, with a reach of 87 miles (140 km).

Sceye is based in Roswell, New Mexico, and already works with the State of New Mexico on providing the Navajo Nation with universal broadband access. However, the airship can also be used for scientific research. Particularly, Sceye will utilize the airship to measure methane emissions, as part of a five-year US Environmental Protection Agency study.

The company recently received new funds from the Mawarid Holding Company (“Mawarid”), so it’s gearing up for a commercial flight in 2025. “The Series C round is a critical milestone for Sceye. These funds will accelerate our platform development and commercial roadmap, paving the way for the commercialization of our HAPS technology in 2025. Our partnership with Mawarid opens new territories and market opportunities for our innovative solutions.” said Mikkel Vestergaard Frandsen, CEO and Founder of Sceye.

Image by Sceye

Related Articles

Latest China Moves Closer to Opening Deep Geological Nuclear Waste Lab Nearly 1,837 Feet Below Surface Image
Construction

China Moves Closer to Opening Deep Geological Nuclear Waste Lab Nearly 1,837 Feet Below Surface

A Critical Step for Long-Term Nuclear Safety China is nearing a major milestone in its nuclear energy program as engineers push forward with a deep geological research laboratory designed to study the safe disposal of radioactive waste. Known as the Beishan Underground Research Laboratory, the facility is taking shape in the remote Gobi Desert in Gansu province. As a result, when completed, it

Latest A Guide to Purchasing Inconel: Tips and Considerations Image
Aerospace

A Guide to Purchasing Inconel: Tips and Considerations

Inconel® is a family of nickel-chromium superalloys known for high strength, corrosion resistance, and oxidation resistance at elevated temperatures. Well-suited to demanding applications, Inconel alloys typically comprise 50–70% nickel, 15–25% chromium, and other elements such as iron, cobalt, molybdenum, and tungsten. The specific composition of an Inconel alloy depends on its intended applicati

Latest Hyundai Steel Plans Hydrogen-Ready Low-Carbon Mill in Louisiana Image
Industry News

Hyundai Steel Plans Hydrogen-Ready Low-Carbon Mill in Louisiana

Hyundai Steel plans to build a hydrogen-ready low-carbon steel mill in Ascension Parish, Louisiana. The project carries an estimated cost of $6 billion and marks the company’s first U.S. steelmaking facility. State officials say the mill will support automotive, energy, and industrial markets that need cleaner flat-rolled and long-product supply. The plant forms part of Hyundai’s broader push t

Latest 3D-Printed Metal Matrix Composite Could Boost High-Temperature Aerospace Components Image
Aerospace

3D-Printed Metal Matrix Composite Could Boost High-Temperature Aerospace Components

A research team at the University of Toronto has created a metal matrix composite that stays light, strong, and stable at temperatures where most aluminum alloys fail. The material is produced through a combination of laser-based additive manufacturing and micro-casting, giving it a reinforced-concrete-like architecture on a microscopic scale. That structure delivers strength at both ambient and e