Subheader Icon 877-412-3651
Request a quote
Article Porsche Wants to Recycle Old EV Batteries for its Next-Gen Vehicles Image

Electric cars are undoubtedly better for the environment as far as their carbon footprint is concerned. Yes, this is true even if you use electricity from coal power plants. However, all those nasty chemicals found in lithium-ion batteries are extremely harmful to the environment, meaning battery waste is a huge point of concern. Producing batteries is raw-material intensive, too.

Fortunately, a few automakers already work on battery recycling; Toyota announced a battery circular economy in 2023, and now Porsche has run a pilot project on how to approach this lingering issue. Notably, the German premium automaker is testing a closed-loop raw material cycle for high-voltage batteries — recovering precious elements like nickel, cobalt, lithium, and manganese from old battery packs and repurposing them into new ones.

The recycling process takes place in three phases. Phase one: shredding the batteries to create a gritty, metal-rich granulate called “black mass.” So far, Porsche has produced 65 tons of it, meaning it has large-scale potential. Then comes the refinement part. The goal here is to recover battery-grade raw materials — not just scrap — so Porsche can maintain the same high-performance standards it’s known for. So, meticulously cleaning the materials from impurities is crucial.

Once these materials are up to spec, Porsche plans to use a defined proportion of these recycled materials to produce new high-voltage battery cells. Crucially, quality should be the same as before.

“With the help of innovative recycling processes, we strive to increase our independence from volatile and geopolitically unstable raw material markets,” says Barbara Frenkel, Executive Board Member for Procurement at Porsche. “Circular Economy is a core pillar of our sustainability strategy, and with this pilot project, we want to underscore our ambitions.”

Porsche aims to reduce its environmental footprint while staying ahead of the EU’s 2031 battery regulations, which are set to enforce stricter sourcing and recycling rules. Ramping up the battery recycling operation will undoubtedly accelerate the automaker’s effort toward achieving that goal.

Image source by Porsche

Related Articles

Latest ORNL PM-HIP Breakthrough Targets Larger Critical Metal Parts Image
Industry News

ORNL PM-HIP Breakthrough Targets Larger Critical Metal Parts

Oak Ridge National Laboratory has developed a manufacturing method that could make large critical metal parts faster to produce, easier to customize, and less dependent on conventional casting and forging supply chains. The U.S. Department of Energy laboratory announced on May 14 that its researchers used additive manufacturing to fabricate custom canisters for powder metallurgical hot isostati

Latest Best Materials for High-Temperature Aerospace Applications Image
Aerospace

Best Materials for High-Temperature Aerospace Applications

Every turbine blade, exhaust duct, and fastener in an aircraft engine faces a punishing combination of heat, stress, and corrosive gas. And the high-temperature aerospace materials that survive those conditions aren't interchangeable. If you pick the wrong alloy, the part can distort, crack, or fails mid-flight. Choosing the best materials for high-temperature aerospace applications starts with un

Latest DOE Awards $94M to Speed Small Modular Reactor Deployment Image
Construction

DOE Awards $94M to Speed Small Modular Reactor Deployment

The U.S. Department of Energy has awarded more than $94 million to eight American companies to accelerate small modular reactor deployment. A move that gives the nuclear sector a fresh push as power demand rises across manufacturing, data centers, and industrial infrastructure. Announced on May 14, the cost-shared funding will support advanced light-water small modular reactors, known as Gen II

Latest NAVAIR Contract Pushes Metal Additive Manufacturing Toward Airworthy Production Image
Aerospace

NAVAIR Contract Pushes Metal Additive Manufacturing Toward Airworthy Production

A new Naval Air Systems Command contract is set to push metal additive manufacturing deeper into certified aerospace production, with direct implications for U.S. defense suppliers, specialty alloy producers, and precision fabrication teams. Colibrium Additive, a GE Aerospace company, announced on April 22 that it received a $31 million NAVAIR contract supporting the Navy’s Additive Manufacturi