Subheader Icon 877-412-3651
Article NASA and MagniX Start Altitude-Testing Hybrid Electric Planes Image

Fully-electric commercial planes are still far from reality. Unlike cars, planes need to carry as little weight as possible, and the heavy lithium-ion batteries certainly won’t help with that. However, hybrid planes, where electricity is used to aid the turbine engines, are around the corner. These would carry much smaller batteries while being more efficient and producing less greenhouse gases. And now, NASA and MagniX joined forces on a feasibility study of hybrid electric propulsion for commercial aircraft.

MagniX specializes in making electric motors for aircraft. The company already made a big splash in the fully-electric segment by making an all-electric version of the Cessna 208 Caravan with a 750-hp electric motor. For the hybrid De Havilland DHC-7 (Dash 7) demonstrator aircraft, MagniX replaced two of its turbo propellor engines with magni650 electric engines, capable of a whopping 700 kW (940 hp). For the battery, NASA and MagniX engineers went with a 450-kWh Samson unit. 

Still, while these engines are definitely capable, they’ll need to prove their mettle at high altitudes. Thus, NASA conducted high-altitude testing at its facilities, using special chambers to simulate an altitude of 27,500 feet (8,4 km). The engineers conducted partial discharge tests to see whether the electrical insulation would be sufficient. This test was critical because most of the issues in electric aircraft engines occur at higher altitudes. Most notably, the air is thinner up in the atmosphere, and the temperature shifts are much greater, too. These can impact the engine’s performance and put additional stress on the components.

“The development of new technologies is a methodical and incremental process,” said Brad French, lead systems engineer for NASA EPFD. “By testing these systems in a controlled environment, we can verify that they operate safely and as expected, or isolate and solve any problems before they pose a significant risk.”

The electrified De Havilland DHC-7 (Dash 7) demonstrator aircraft is designed to carry up to 50 passengers, mostly on short-to-mid distances. NASA and MagniX also completed baseline flight testing, necessary to compare how much of a gain in fuel efficiency and power the new hybrid propulsion brings.

Image credit: MagniX

Related Articles

Latest NIST Laser Method Could Unlock New 3D-Printed Metal Alloys Image
Industry News

NIST Laser Method Could Unlock New 3D-Printed Metal Alloys

Argonne National Laboratory’s Advanced Photon Source allowed researchers to observe the formation of new metal alloys during 3D printing, offering a closer look at the processes that shape next-generation materials. Credit: Argonne National Laboratory NIST researchers have developed a new laser-based method that could make 3D-printed metal alloys easier to produce, opening a possible route to s

Latest NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time Image
Aerospace

NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time

NASA’s X-59 quiet supersonic research aircraft has flown faster than the speed of sound for the first time, marking a major milestone for the agency’s Quesst mission. The aircraft reached supersonic speed on Friday, June 5, 2026, during an 81-minute test flight that began and ended at Edwards Air Force Base in California. NASA test pilot Jim “Clue” Less flew the X-59 to Mach 1.1, or about 713 m

Latest Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained Image
Metals

Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained

The best aluminum alloys for CNC machining balance machinability, strength, corrosion resistance, fatigue life, finish quality, and cost. For most buyers, the shortlist comes down to 6061, 7075, and 2024 aluminum. What are the best aluminum alloys for CNC machining? The best aluminum alloys for CNC machining are usually 6061, 7075, and 2024. Choose 6061 for general-purpose machined component

Latest U.S. Funds Global Tungsten Network as China Supply Risk Grows Image
Industry News

U.S. Funds Global Tungsten Network as China Supply Risk Grows

The U.S. is using government finance, defense funding, and stockpiling to rebuild tungsten supply chains and reduce reliance on China, according to Fastmarkets. Tungsten is used in armor-piercing munitions, aerospace alloys, and advanced manufacturing, but U.S. domestic mining has faded over several decades. Washington’s strategy combines support from the Export-Import Bank of the United States