Subheader Icon 877-412-3651
Article Americans are Drilling Deeper Than Ever for Fresh Water – Why? Image
Image by Rudy and Peter Skitterians from Pixabay

Humans have over the centuries used water as if there was an endless “tap” providing a supply. But the source is drying up. In America alone, more than 100 Million depend daily on this unseen water supply for their daily living needs.

So, what is causing this? The earth has a unique balance to sustain life on earth, but as the world’s population increases, so does the consumer needs. To sustain this growth more water is required. Thus, the saying time is money. Keeping in mind that groundwater consists of 22% of freshwater on earth, Man is not allowing nature to restore the water balance by pumping out more than nature can put in.

To maintain the demand for water and the low underground water supply levels in cavities, humans are forced to drill deeper to get to the water, thus fueling the looming monster: drought. 

Here are a few negative effects of groundwater depletion:

  1. drying up of wells
  2. reduction of water in streams and lakes
  3. deterioration of water quality
  4. increased pumping costs
  5. land subsidence

Scientists have now also determined that the depletion of underground water levels will have a huge impact on sea level rises taking the podium in 3rd place after the melting ice sheets of Antarctica and Greenland. Studies showed that the rainwater does not seep back into the underground cavities and ends up in natural lakes and rivers where the water is eventually gets deposited into the sea. Calculations predict that by 2050, 25% of the sea-level rise will be ascribed to the depletion of groundwater caused by the ever-increasing demand for freshwater.

There has been disturbing neglect in control of groundwater usage, especially by farmers and big cities. The state of California is the first to implement regulation instructing farmers how to manage the use of groundwater and let’s hope, this will take root in other states before water will be seen as an endangered resource.

Article Source: Industry Tap

Related Articles

Latest NIST Laser Method Could Unlock New 3D-Printed Metal Alloys Image
Industry News

NIST Laser Method Could Unlock New 3D-Printed Metal Alloys

Argonne National Laboratory’s Advanced Photon Source allowed researchers to observe the formation of new metal alloys during 3D printing, offering a closer look at the processes that shape next-generation materials. Credit: Argonne National Laboratory NIST researchers have developed a new laser-based method that could make 3D-printed metal alloys easier to produce, opening a possible route to s

Latest NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time Image
Aerospace

NASA’s X-59 Quiet Supersonic Aircraft Breaks the Sound Barrier for the First Time

NASA’s X-59 quiet supersonic research aircraft has flown faster than the speed of sound for the first time, marking a major milestone for the agency’s Quesst mission. The aircraft reached supersonic speed on Friday, June 5, 2026, during an 81-minute test flight that began and ended at Edwards Air Force Base in California. NASA test pilot Jim “Clue” Less flew the X-59 to Mach 1.1, or about 713 m

Latest Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained Image
Metals

Best Aluminum Alloys for CNC Machining: 6061 vs 7075 vs 2024 Explained

The best aluminum alloys for CNC machining balance machinability, strength, corrosion resistance, fatigue life, finish quality, and cost. For most buyers, the shortlist comes down to 6061, 7075, and 2024 aluminum. What are the best aluminum alloys for CNC machining? The best aluminum alloys for CNC machining are usually 6061, 7075, and 2024. Choose 6061 for general-purpose machined component

Latest U.S. Funds Global Tungsten Network as China Supply Risk Grows Image
Industry News

U.S. Funds Global Tungsten Network as China Supply Risk Grows

The U.S. is using government finance, defense funding, and stockpiling to rebuild tungsten supply chains and reduce reliance on China, according to Fastmarkets. Tungsten is used in armor-piercing munitions, aerospace alloys, and advanced manufacturing, but U.S. domestic mining has faded over several decades. Washington’s strategy combines support from the Export-Import Bank of the United States